Christmas Tutorial: Merry Bee Picture

Merry Bee Tutorial

Before you begin this project before sure to read through all the instructions first, and then there will be no stopping you. If you have any questions at all feel free to leave me a comment. You'll also learn a couple of new ways of doing things, such as transferring the design using tissue paper.

For this very Merry Bee you will need:

• Print out of the pattern
• 6” Embroidery Wooden Hoop (or a size that suits your preference – feel free to blow the design up or scale it down)
• Background fabric of your choice, if your using the 6" hoop you'll need a piece 11" square
• Scraps of Wool felt: yellow, white, red and black
• Stranded Cottons: Black, brown and burgundy (I've used DMC 310, 300 and 815)
• White machine thread or white stranded cotton will also work
• Needles
• Pins
• Tissue Paper / light box / transfer crayon
• Pencil
• Sharp scissors

1.       If your background fabric is fairly see-through then you can use a light box or your window to transfer the design onto the fabric. Then place the fabric into your frame making sure it’s taut, then skip step 2.

2.       If your fabric is too thick or dark for the methods listed in step 1, then you could use transfer paper or you can use the method I use, which is using tissue paper. Place your fabric into your frame, making sure the fabric is taut and trace the design onto your tissue paper, and pin it onto your hoop.

3.       Whatever transfer method you used we are going to start at the same place which is the dashed lines. Thread up your needle with two strands of black cotton. The dashes are stitched in multiple back stitches, a dash line roughly equates to three tiny back stitches.

4.       Time to move onto ‘Merry’ is also stitched in back stitch but using two strands of burgundy coloured thread instead. Keep your stitch sizes regular, this will make sure the finish is nice and neat.  Skip step 5 and 6 if you've not used the tissue paper method to transfer the design. 

5.       Using your white thread, running stitch around the main bee body, and the wings.

6.       Now the fun bit you can start to tear off the tissue paper, be careful around the stitches, if any tissue paper gets trapped under a stitch, you can either tease it out with a sharp needle or use tweezers. Whatever you have to hand.

7.       Stitching the padding on the bee body: The body is made up of several layers of yellow felt. Using the template cut out the three sizes marked as bee body. Starting with the smallest piece, pin it loosely in the middle of the shape (as shown). As this is a padding layer, it doesn’t matter if you use yellow cotton or white to stab stitch around the shape. When you’ve stitched the first layer on, stitch the next size up over the top of the first.

8.       Wings: As with the body of the bee, the wings have padding. Cut from the white felt the two wing shapes. Stitch the smallest layer down first, and then the larger piece over the top. I used the guidelines on the background fabric to help the felt piece keep its shape, these guideline stitches will become hidden by your stitching and the felt.

9.   Time to stitch the line that separates the wings. Thread up your needle with your white cotton thread, and using your print out as a guide, back stitch a curve as shown below. If you’re not sure where the line should go, use the tissue paper technique.

10.   Return to the main bee body. Before we stitch the top layer on, you need to cut out the three thin stripes from the black felt, and stitch them onto the largest yellow shape. I used a single strand of the black thread and running stitch up the middle of the black strip to attach it to the yellow. As with the padded layers, you will stab stitching the layer all the way round the edge, this time make sure you’re using a matching yellow thread, and keep the stitches small and neat.

11.   Finishing Details: The eye is a French Knot, in a single thread of black cotton and three wraps of the needle. And the smile is also in a single thread of black, and is in back stitch. 

12.   Nose: Cut out a small circle of red felt, owing to how tiny it is a template isn’t necessary, think a size of a sequin. Stab stitch it down with matching red thread. Don’t fancy cutting out a piece of felt that small? Then you can use a small red pompom.

13.   Antlers: I’ve used two strands of brown cotton and back stitch. You can use your tissue method to transfer the antlers lines or free style. 

14.   With the stitching complete you can use the design to adorn anything such as a cushion or part of a Christmas quilt. Or for a temporary solution, so that you use a hoop again, follow these simple instructions:

a.       Using the hoop that the picture will be framed in, cut back your fabric so that you have a seam allowance of about 2 inches all the way round. Then thread up your needle with thread and do a gathering stitch around the edge, once you've gone all the way round pull the threads in to gather around the inner hoop. Once your happy that the gathering is neat and the gathering thread is secure, you can then cut off any remaining thread. Add a ribbon to the tightening fitting on the hoop and hang up! 

Viola your done!